InCare Air

Coming soon in India

Breathe cleaner air at home.

InCare Air is a smart air purifier with three-stage filtration, a live PM2.5 display on the device and full control from the InCare Appliances app.

InCare Air purifier standing in a bright living room
  • Three-stage filtration
  • Live PM2.5 display
  • App control

Filtration

Three stages between you and dirty air.

Air is pulled in from all four sides and passes through three layers before it comes out of the top, cleaner.

InCare Air’s filter stack pulled apart: pre-filter mesh, H13 HEPA filter and activated carbon
  1. 01

    Pre-filter mesh

    Catches hair, pet fur and larger dust before they reach the main filter.

  2. 02

    H13 HEPA filter

    Traps fine particles such as PM2.5, pollen and household dust.

  3. 03

    Activated carbon

    Helps absorb everyday odours from cooking, smoke and pets.

On the display

What the colours mean.

The bar above the reading changes colour with PM2.5, and the app shows the same colour. In Night mode the display dims.

  • InCare Air display showing a Good reading

    Good

    0–30 µg/m³

    Clean air. Auto mode idles quietly.

  • InCare Air display showing a Moderate reading

    Moderate

    31–60 µg/m³

    Some particles. The fan steps up.

  • InCare Air display showing a Poor reading

    Poor

    61–120 µg/m³

    Polluted air. The fan works harder.

  • InCare Air display showing a Very poor reading

    Very poor

    121+ µg/m³

    Hazardous. Full speed until it clears.

Every icon, explained.

InCare Air display with every status light and touch button lit

Status lights

  • Filter reset

    Lights up when a new filter is due

  • Auto

    Fan speed follows the PM2.5 reading

  • Night

    Quietest speed, display dimmed

  • Manual

    You choose the fan speed

  • Wi-Fi

    Connected to the InCare Appliances app

  • Child lock

    Buttons locked; the app still works

Touch buttons

  • Power

    Turn it on or off

  • Light

    Display on, dim or off

  • Mode

    Switch between Auto, Night and Manual

Design

Quiet design that fits any room.

A clean white body, a smoked-finish display and air drawn in from all four sides. It looks at home in any room and never asks for attention.

  1. 01

    Smoked-finish display

    A tinted panel shows PM2.5 and mode at a glance, and dims in Night mode.

  2. 02

    235 × 235 mm footprint

    493 mm tall. Tucks in beside a sofa, a desk or a bed.

  3. 03

    Air in from all four sides

    A 360° intake grille draws air evenly, so it works wherever you put it.

  4. 04

    Clean air out of the top

    Filtered air rises and circulates through the whole room.

InCare Air from the front

235 × 235 × 493 mm

InCare Air from above
InCare Air from the left side
Close-up of the InCare Air display

The InCare Appliances app

Control it from your phone.

Pair InCare Air with the InCare Appliances app to see live readings and change settings from anywhere.

The InCare Appliances app on a phone: Living Room Air, PM2.5 reading 8 (Good), Auto, Manual and Night modes, fan speed and display light controls
  • Live PM2.5 readings

    See the same reading as the display, on your phone.

  • Modes and schedules

    Auto, Night and Manual, plus a weekly scheduler.

  • Filter reminders

    Know when it is time to change the filter.

Coming soon on the App Store and Google Play

FAQ

Clean air, explained.

Why indoor air matters, what each filter does, and how InCare Air fits into your home.

Why do I need an air purifier at home?

Indoor air is rarely as clean as it looks. Dust, PM2.5 from traffic and outdoor smog, smoke from cooking, incense and mosquito coils, pollen and pet dander all build up indoors, especially when the windows stay shut in winter or while the AC runs.

An air purifier keeps drawing the room’s air through its filters and traps these particles. It helps most on the days when opening a window would only let more pollution in.

What are the benefits of using an air purifier?

Run regularly in a closed room, a good air purifier gives you:

  • Fewer fine particles (PM2.5) in the air you breathe at home.
  • Less airborne dust, pollen, pet dander and other common allergens, which can make the room more comfortable for people who are sensitive to them.
  • Fewer lingering odours from cooking, smoke and pets, when it has an activated carbon layer.
  • A clear view of your air: a live PM2.5 reading shows when the air is fine and when it needs attention.

What is PM2.5, and why does it matter?

PM2.5 means airborne particles 2.5 micrometres (µm) across or smaller, about thirty times finer than a human hair. It comes from vehicle exhaust, construction dust, burning, cooking and smoke.

Particles this small can travel deep into the lungs, which is why PM2.5 is one of the main pollutants behind the Air Quality Index (AQI). For a 24-hour average, India’s national standard is 60 µg/m³ and the World Health Organization’s guideline is 15 µg/m³. Many Indian cities go well past both, especially in winter.

What does an H13 HEPA filter remove?

H13 is a HEPA grade defined by the European standard EN 1822. To earn it, a filter has to trap at least 99.95% of particles at the size that is hardest to catch, around 0.1 to 0.3 µm.

At home, that means fine dust and PM2.5, pollen, mould spores, pet dander, dust-mite debris and smoke particles. HEPA filters catch particles, not gases, so odours are the activated carbon layer’s job.

What does the activated carbon layer do?

Activated carbon is full of tiny pores that hold on to odour molecules and some gases as air passes through. It helps with everyday smells from cooking, smoke and pets, which a HEPA filter alone can’t catch.

What is CADR, and what does the number mean?

CADR stands for Clean Air Delivery Rate: how much clean, filtered air a purifier delivers, usually given in cubic metres per hour (m³/h). Some brands quote cubic feet per minute (CFM) instead; 1 CFM is about 1.7 m³/h.

It is measured in a sealed test room at the highest fan speed, by timing how quickly the purifier clears smoke, dust or pollen from the air. So it reflects both how much air the fan moves and how well the filter traps particles. For PM2.5, look at the smoke or particle figure, because smoke particles are the finest of the three.

A higher CADR cleans a room faster. Divide it by your room’s volume (length × width × height, in metres) to see roughly how many times an hour the purifier can clean all the air in the room. About five times an hour is a common target. For example, a 4 m × 3 m bedroom with a 3 m ceiling holds 36 m³ of air, so a purifier with a CADR of around 180 m³/h would clean it about five times an hour.

Lower fan speeds deliver less than the rated figure, so a purifier with some headroom for your room can run on a quieter setting and still keep up.

Where should I place an air purifier?

In the room where you spend the most time, usually the bedroom or living room. Keep doors and windows closed while it runs, so it cleans your room rather than the air coming in from outside, and leave a little space around it so air can flow in freely.

InCare Air draws air in from all four sides and sends clean air out of the top, so it can stand beside a sofa, a desk or a bed.

Can an air purifier replace opening the windows?

No. A purifier removes particles and, with a carbon layer, everyday odours, but it doesn’t bring in fresh air or lower carbon dioxide. Air the room out when the air outside is clean, and let the purifier take over when it isn’t.

How does InCare Air clean the air?

Air is pulled in through a 360° grille on all four sides and passes through three stages: a pre-filter mesh for hair, pet fur and larger dust, an H13 HEPA filter for fine particles, and activated carbon for odours. Clean air comes out of the top.

In Auto mode the fan follows the live PM2.5 reading: it steps up as the air gets worse and idles quietly when the air is clean.

Can I control InCare Air from my phone?

Yes. The InCare Appliances app shows the same live PM2.5 reading as the display, switches between Auto, Night and Manual, runs a weekly schedule and reminds you when it’s time to change the filter. It’s coming soon on the App Store and Google Play.

When will InCare Air be available?

InCare Air is coming soon in India. Use the Enquire Now button and leave your details, and our team will get in touch as soon as it’s available in your city.

Who makes InCare Air?

InCare Air is made by InCare Appliances Pvt. Ltd., based in Ahmedabad, Gujarat. It is designed, developed and built in India.

Launching soon

Be among the first to bring InCare Air home.

Leave your details and our team will get in touch as soon as InCare Air is available in your city.

Enquire Now

Enquire about InCare Air

Share your details and our team will get back to you shortly.

Up to 250 characters, 0 used

We only use these details to respond to your enquiry. Privacy Policy